{{item.currency}} {{pricing}}





{{item.currency}} {{pricing}} {{item.currency}} {{item.normalPrice}}



{{item.currency}} {{pricing}} - Out of Stock
  pdf logo Victron BlueSolar MPPT 75/15

Victron BlueSolar MPPT 75/10(12/24V-10A)

  pdf logo Bluetooth Smart dongle Call or email us for availability & shipping.
Victron BlueSolar MPPT 75/10(12/24V-10A)

Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT
controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10%
compared to slower MPPT controllers.

Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output
will disconnect the load when the battery has been discharged to a pre-set voltage.
Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life.
The load output is short circuit proof.
Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote
control connected to the load output. A special interface cable may be needed, please see the manual.

Victron BlueSolar MPPT 75/10(12/24V-10A)

Battery Life: intelligent battery management
When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months.
The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.

Programmable battery charge algorithm
See the software section on our website for details

Programming, real-time data and history display options
- Modern Apple and Android smartphones, tablets, macbooks and other devices: see the
VE.Direct Bluetooth Smart dongle and the MPPT app discovery sheet for screenshots.
- ColorControl panel.

Victron BlueSolar MPPT 75/10(12/24V-10A)
BlueSolar Charge Controller. MPPT 75/15
Battery voltage. 12/24V Auto Select
Rated charge current. 15A
Maximum PV power, 12V 1a,b). 200W
Maximum PV power, 24V 1a,b). 400W
Max. PV short circuit current 2). 15A
Automatic load disconnect. Yes, maximum load 15A
Maximum PV open circuit voltage. 75V
Charge voltage 'float' 13,8V / 27,6V (adjustable)
Charge algorithm multi-stage adaptive
Temperature compensation -16 mV / °C resp. -32 mV / °C
Continuous/peak load current  15A / 50A
Low voltage load disconnect 11,1V / 22,2V or 11,8V / 23,6V
or Battery Life algorithm
Low voltage load reconnect 13,1V / 26,2V or 14V / 28V
or Battery Life algorithm
Protection Battery reverse polarity (fuse)
Operating temperature -30 to +60°C (full rated output up to 40°C)
Humidity 95%, non-condensing
Data communication port VE.Direct
See the data communication white paper on our website
ENCLOSURE
Colour Blue (RAL 5012)
Power terminals 6 mm² / AWG10
Protection category IP43 (electronic components), IP22 (connection area)
Weight 0,5 kg
Dimensions (h x w x d) 100 x 113 x 40 mm

 

 

 

 

 

Back Back to top